Decal Application
Applying a vinyl decal is a relatively simple process. TrixGraphix only uses high quality vinyl that is suitable for both indoor and outdoor applications. Therefore, any of these decals can be applied to items such as laptops as well as vehicles. The only requirement is that it is a smooth clean surface.
Step 1
The first, and most important, thing to do is prepare the surface. Make sure the surface is as clean as possible. There should not be any dust, dirt, oils, etc. on the surface. Then, simply choose where you would like the decal to be placed.
Step 2
You can apply a piece of tape to one end to help hold it in place. With smaller decals that may not be as necessary. Then take something with a hard straight edge (squeegee or credit card) and squeegee the entire decal. This is to help ensure the vinyl is properly adhered to the masking tape.
Step 3
Carefully peel the masking tape from the backing. Be sure that all the vinyl is adhered to the masking tape.
Step 4
Take your straight edge and squeegee the decal onto the surface working from one end to the other. Squeegee the entire decal surface very well to ensure proper adhesion to the surface.
Step 5
Starting from one corner, slowly and carefully peel back the masking tape at an angle.
Step 6
Enjoy!!! That’s all there is to it.
